Proceedings · Session S-653 · filed November 17, 2026

Lab Technology & MethodsSession paper

Biohybrid Mesh Harvester Delivers 10x Power Density of Rivals

UMass Amherst engineers built a piezoelectric mesh layered with cardiac cells that produced ten times the power density of centralized harvesting systems, published in Science Advances.

By Priya Raman3 min read694 words

Summary

  • UMass Amherst's biohybrid mesh harvester generated 10x the power density of centralized harvesting systems, per Science Advances.
  • Implantable device batteries last about 5–15 years and require surgical replacement.
  • Mesh ribbons measure 20–100 µm laterally, smaller than a typical cell, to promote cell attachment.
  • Researchers used human embryonic stem cell-derived cardiomyocytes that grew into laminar cardiac microtissue around the mesh.
  • PZT thin films on biocompatible polyimide and SU-8 form the harvesting and insulation layers.
Energy-harvesting mesh could replace batteries in implantable medical devices
FigureEnergy-harvesting mesh could replace batteries in implantable medical devices — Kost9n4 / pixabay

A prototype energy-harvesting mesh developed at the University of Massachusetts Amherst generated ten times more power density than existing harvesting systems built on a centralized architecture, according to results published in Science Advances. The figure matters because implantable pacemakers and cardioverter-defibrillators run on batteries that last roughly five to 15 years, and every replacement demands surgery that carries cost and clinical risk.

Principal investigator Jun Yao and first author Siqi Wang built what they call a biohybrid mesh harvester: a distributed network of thin piezoelectric ribbons layered with living human cells so that the device moves and looks like tissue while supplying electricity continuously. "We wanted to shift the traditional, centralized paradigm to something more distributed and modelled on biology," Yao said in a press statement. "The beauty of this system is how non-invasive and powerful it is. Our bodies want to reject systems that come with bulk batteries, but when the device exists at the cellular level, you get vastly improved biocompatibility."

How does the design work?

The team took its cue from cell biology. Every human cell generates both electrical and mechanical power and operates as its own power plant. Rather than concentrating energy conversion in one battery-like unit, the researchers replicated that distributed biological model across a mesh.

The hardware consists of an array of thin ribbons carrying thin-film harvesters on an ultrathin, ultraflexible polymer platform. Each harvesting unit is a piezoelectric film of lead zirconate titanate (PZT) sandwiched between two electrodes and patterned into a slender rectangular geometry aligned with the ribbons to bend easily and encourage cells to attach.

The dimensions are engineered around the cells themselves. The ribbons measure 20–100 µm laterally — smaller than a typical cell — to promote attachment, and they interconnect into a rectangular lattice with spacing considerably larger than a cell so that cells can infiltrate the network.

The materials stack reflects biocompatibility constraints. The bottom dielectric layer uses biocompatible polyimide for structural integrity. SU-8, a biocompatible photoresist, serves as the intermediate layer connecting the top and bottom electrodes, as the top dielectric enabling multilayer lithographic patterning, and as a final capping layer completing electrical insulation of the PZT units and interconnects.

What did the researchers actually measure?

In the proof-of-concept experiment, the team seeded the structure with human embryonic stem cell-derived cardiomyocytes. The cardiac cells aggregated around the mesh and grew into a laminar cardiac microtissue, integrating seamlessly into and around the platform. Beating cardiac tissue supplied the mechanical energy that the PZT units converted into electricity.

The tenfold power-density gain is the headline measured result, and it applies specifically against existing centralized harvesting systems in this first-generation design. When the researchers tested the mesh's harvesting capability, they found that meshes could be layered to achieve greater energy production — a scaling path that could matter for devices with higher power budgets.

The integration itself carries a second payoff beyond energy. The researchers note that seamless meshing with cardiac microtissues offers a strategy for engineering templated laminar microtissues, with potential applications in tissue transplantation.

What are the limits and the roadmap?

This is a proof-of-concept study, not a validated power source for a pacemaker. The work used cardiac microtissue in vitro; the paper does not yet report performance in a living animal or a human implant, and the team frames extension to other energy modalities beyond mechanical sources as a framework rather than a demonstrated result.

The researchers believe the architecture generalizes to other biohybrid harvesting systems, and they point toward a longer-term goal. "Ultimately, such systems could enable the retrieval or conversion of cellular energy, potentially emulating the broadly distributed ATP-based processes in biological systems, to achieve greater energy sustainability," they write.

For R&D managers weighing implantable-power portfolios, the immediate takeaway is measured, not projected: a distributed, cell-integrated mesh has now outperformed centralized harvesting designs by an order of magnitude in power density at the microtissue scale. Whether the platform can deliver the sustained output a pacemaker requires in vivo is the question the next phase of Yao and Wang's work must answer.

via umass.edu (Original)

Filed under

  • biohybrid-energy-harvesting
  • piezoelectric-materials
  • implantable-medical-devices
  • cardiac-microtissues
  • tissue-engineering
Share this article:

More from Priya Raman

Priya Raman

Show full bio

Staff writer covering money, funding and market shifts around research and development at Hypothesis Wire.

281 articles

References

  1. Wireless Implant Restored Normal Glucose in Diabetic Mice Within an Hour
  2. Graphene harvester powers a battery-free temperature sensor
  3. ETH Zurich implant clears glucose via electrocatalysis, no drugs
  4. Sandia develops microwave process for spent battery cathode upcycling
  5. MIT modules retain electrical links through 10,000 compressions

« Previous articleNext article »